Mercury 200 Optimax Specifikace stáhnout pdf (Strana 99)

MAINTENANCE

eng 87

2. Remove the spark plugs to inspect. Replace spark plug if

electrode is worn or the insulator is rough, cracked, broken,

blistered, or fouled.

26946

3. Set the spark plug gap to specification.

26947

Spark Plug Gap

200/225 hp 0.80 mm (0.031 in.)

250 hp 1.06 mm (0.042 in.)

4. Before installing spark plugs, clean off any dirt on the spark

plug seats. Install plugs finger‑tight, and then tighten 1/4 turn

or torque to specifications.

Description

Nm lb. in. lb. ft.

Spark plug 27 20

Compressor Air Intake Filter for 200 and 225 HP

Models

NOTE: The compressor air intake filter is only used on the 200

and 225 hp models.

The filter should be inspected and replaced, if required, every

100 hours of operation, or once a season.

REMOVAL

1. Open the clamp and lift out the filter housing. Rotate the

filter housing 1/4 turn clockwise to the unlock position and

remove the air filter.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 148 149

Žádné komentáře

Mercury 200 Optimax Specifikace Strana 99