Mercury 250 Specifikace stáhnout pdf (Strana 132)

OUTBOARD INSTALLATION

122 eng

3. Turn the ignition key switch back to the "OFF" position, and

squeeze the primer bulb again until it feels firm. Turn the

ignition key switch to the "ON" position again for three

seconds. Continue this procedure until the fuel line primer

bulb stays firm.

Installation Specifications

a - Minimum transom opening

b - Engine centerline for dual engine ‑ 66.0 cm (26 in.)

Minimum Transom Opening

Single engine 84.8 cm (33‑3/8 in.)

Dual engine 151.8 cm (59‑3/4 in.)

Lifting the Outboard

WARNING

Improperly supporting an engine during lifting can result in the

engine falling, causing serious injury or death. Before lifting the

engine, verify that the lifting ring is threaded into the flywheel

for a minimum of five turns and that the hoist has the correct

lifting capacity for the engine weight.

To lift the outboard:

1. Remove the cowl from the outboard.

18552

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 162 163

Žádné komentáře

Mercury 250 Specifikace Strana 132